Best seller
Balloon Arch Kit 9 ft × 10 ft
The classic kit: 15 folding fiberglass sections, two PVC bases with water bags, ground stakes and ropes, 50 balloon clips, two knotters and a hand pump.
- Size
- 108 in × 120 in
- Base
- Water/sand bags
Party & wedding decor frames
Balloon arches and backdrop stands, ready in minutes
Chamvis makes reusable frames for balloon garlands, flower walls and photo corners: adjustable fiberglass arch kits, gold metal round stands, a rustic wooden wedding arch and electric pumps that fill hundreds of balloons.
See the lineup
- 21,077amazon.com ratings
- 15products
- 4product lines
- 2 minframe setup
One brand for the whole decorating job
Chamvis started with a simple fiberglass balloon arch kit and grew into a full set of event frames. Arch kits stand on water-fillable bases and bend into the height and width you need; balloon columns add two towers on either side of a cake table; clamp-on table arches and an over-the-table rod stand bring decor right above the food.
For weddings and photo walls there are gold metal round stands, a pair of moon-shaped half arches and a burnt-wood square arbor. Every frame comes apart into short sections, so it packs into a small box after the event and comes out again for the next birthday, shower or graduation.
Adjustable size
Move the bases closer or further apart to change the height and width of an arch kit.
Weighted bases
Water or sand bags, ground stakes and ropes keep the frame steady indoors and out.
Folds away
Shock-corded fiberglass poles and threaded metal tubes break down into short pieces.
Air, not helium
The electric pumps fill latex balloons with plain air — no tanks to rent.
Balloon arch kits & columns
Freestanding frames for garlands: bend the fiberglass pole into an arch, anchor the bases, then clip balloons on.
Balloon Arch Kit + Electric Pump
The same adjustable 9 ft × 10 ft fiberglass arch, packed with a 600 W electric balloon pump so inflating is no longer the slow part.
- Size
- 108 in × 120 in
- Base
- Water/sand bags
Balloon Arch Kit 7.4 ft + Electric Pump
Kit built around 21 fiberglass sections with an electric pump, two water-bag bases, 30 clips, knotters, stakes and ropes.
- Size
- up to 89 in
- Base
- Water/sand bags
Balloon Arch Kit 9 ft × 10 ft (newer listing)
Newer listing of the adjustable garland frame with the same parts list — fiberglass poles, water-bag bases, stakes, clips and a hand pump.
- Size
- 108 in × 120 in
- Base
- Water/sand bags
Balloon Column Kit, Set of 2
Two telescopic columns up to 6.56 ft with water-fillable bases, a top pole for a feature balloon, 30 clips, rose clips and glue dots.
- Size
- up to 79 in
- Base
- Water/sand bags
Table balloon arches
Frames that clamp to the edge of a table and keep the floor around it clear.
Table Balloon Arch 13 ft — White
Two C-clamps and ten 15.5-inch fiberglass poles make a 13 ft arch over a table; plan on 100+ balloons of 10–12 inches.
- Size
- 156 in
- Base
- Table clamps
Rating shared with other versions on the same amazon.com page.
Details
Over-the-Table Rod Stand, Gold
Gold metal frame that clamps to the table edges, adjustable from 30 to 56.4 in high and 46.8 to 99.6 in wide, for flowers, banners or balloons.
- Size
- 30 in–56.4 in × 46.8 in–99.6 in
- Base
- Table clamps
Backdrop stands & wedding arches
Metal and wood frames for flowers, draping fabric, neon signs and balloon garlands.
Round Backdrop Stand 7.2 ft — T-Support
Gold metal circle on two angled T-feet with a double-buckle joint; dress it with flowers, tulle, lights or a balloon garland.
- Size
- 86 in × 86 in
- Base
- Angled T-feet
Rating shared with other versions on the same amazon.com page.
Details
Round Backdrop Stand 6.2 ft — V-Support
A slightly smaller gold circle on a V-shaped stand, same frosted-metal finish and quick threaded assembly.
- Size
- 74 in × 74 in
- Base
- V-shaped stand
Rating shared with other versions on the same amazon.com page.
Details
Half-Moon Arch Backdrop, Set of 2
Two gold half arches of different heights on wide rectangular feet; set them close or apart to frame a ceremony or dessert table.
- Size
- Adjustable
- Base
- Rectangular feet
Moon Arch Backdrop Stand
Newer powder-coated version of the half-moon frame set, with short sections that screw together.
- Size
- Adjustable
- Base
- Rectangular feet
Wooden Square Wedding Arch 7.48 ft
Rustic burnt-finish wood arbor, about 89 × 89 in, braced with rear boards and four U-shaped ground stakes for outdoor use.
- Size
- 89 in × 89 in
- Base
- Braces + ground stakes
Electric balloon pumps
Plug-in inflators for latex balloons. On amazon.com these models share one listing and one review pool, sold as "colors".
Electric Balloon Pump — Black
Dual-nozzle 110 V inflator with continuous and touch-to-inflate modes, compact enough to carry to the venue.
- Power
- 600 W
- Nozzles
- 2
Rating shared with other versions on the same amazon.com page.
Details
Electric Balloon Pump — Blue/Red
The 600 W, two-nozzle pump with manual and automatic modes, cord storage and auto shut-off when left idle.
- Power
- 600 W
- Nozzles
- 2
Rating shared with other versions on the same amazon.com page.
Details
Dual-Motor Balloon Pump — Green
Two independent motors and five nozzles for latex, foil and 260Q long balloons — it also inflates pool floats and air mattresses.
- Power
- 600 W
- Nozzles
- 5 · 2 motors
Rating shared with other versions on the same amazon.com page.
DetailsWhere Chamvis frames end up
Birthday and baby-shower backdrops
A round stand or arch kit turns one wall into the photo spot of the party. Mix balloon sizes, add greenery or a neon sign, and change the colors for the next event.
Ceremony arches
The wooden square arbor and the gold metal stands take draping fabric, flower garlands and lights. Stakes and weighted feet keep them upright on grass.
Decor right above the table
The over-the-table rod stand and the 13 ft table arch clamp to the table edge, so flowers or balloons hang over the cake and plates without stands on the floor.
Hundreds of balloons without the dizziness
An electric pump fills a balloon in a couple of seconds, which is what makes a full garland realistic for one or two people.
See it set up
Compare the frames
Key facts from the listings. Arch kit sizes depend on how far apart you place the bases.
| Balloon Arch Kit 9 ft × 10 ft | Balloon Arch Kit + Electric Pump | Balloon Arch Kit 7.4 ft + Electric Pump | Balloon Arch Kit 9 ft × 10 ft (new) | Balloon Column Kit, Set of 2 | Table Balloon Arch 13 ft | Over-the-Table Rod Stand, Gold | Round Backdrop Stand 7.2 ft | Round Backdrop Stand 6.2 ft | Half-Moon Arch Backdrop, Set of 2 | Moon Arch Backdrop Stand | Wooden Square Wedding Arch 7.48 ft | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type | Arch kit | Arch kit | Arch kit | Arch kit | Arch kit | Table frame | Table frame | Backdrop stand | Backdrop stand | Backdrop stand | Backdrop stand | Backdrop stand |
| Height | 108 in (9 ft) | 108 in (9 ft) | 89 in (7.4 ft) | 108 in (9 ft) | 79 in (6.6 ft) | — | 30 in–56.4 in | 86 in (7.2 ft) | 74 in (6.2 ft) | — | — | 89 in (7.4 ft) |
| Width | 120 in (10 ft) | 120 in (10 ft) | Adjustable | 120 in (10 ft) | Adjustable | 156 in (13 ft) | 46.8 in–99.6 in | 86 in (7.2 ft) | 74 in (6.2 ft) | — | — | 89 in (7.4 ft) |
| Frame | Fiberglass poles | Fiberglass poles | Fiberglass poles | Fiberglass poles | PVC tubes | Fiberglass poles | Gold metal | Gold metal | Gold metal | Gold metal | Gold metal | Burnt wood |
| Base & anchoring | Water/sand bags | Water/sand bags | Water/sand bags | Water/sand bags | Water/sand bags | Table clamps | Table clamps | Angled T-feet | V-shaped stand | Rectangular feet | Rectangular feet | Braces + ground stakes |
| Electric pump | Not included | Included | Included | Not included | Not included | Not included | Not included | Not included | Not included | Not included | Not included | Not included |
| Model | CV-CA-302 | CV-US-302 | CV-US-302 | — | CV-US-314 | CV-US-520 | CV-US-521 | CV-CA-334 | CV-US-522 | CV-US-357 | CV-US-380 | — |
How to set up a Chamvis balloon arch kit
Based on the instructions that come with the fiberglass arch kits. Budget about an hour for the first arch, including balloons.
What is in the arch kit
- 15 folding fiberglass pole sections (21 in the 7.4 ft kit)
- 2 PVC bases and 2 PVC pipes
- 2 water/sand bags
- 4 ground stakes and 2 secure ropes
- Balloon clips and 2 balloon knotters
- Hand pump or electric pump, depending on the kit
Tips from owners
- Wind: Outdoors, use the stakes and ropes; on a gusty day set the arch up indoors or against a wall.
- Balloons: A full 9 × 10 ft arch takes a few hundred balloons — plan extra.
- Help: A second person and a step stool make the top of the arch much easier.
- 1
Fill the bases
Fill both bags with water or sand and set them into the PVC bases where the arch will stand.
- 2
Connect the pole
Unfold the shock-corded fiberglass sections so they click into one long pole.
- 3
Bend and seat it
Push each end of the pole into a PVC pipe on the bases; move the bases to set the height and width.
- 4
Anchor it
Outdoors, add the ground stakes and tie the ropes; indoors, the weighted bases or a wall do the job.
- 5
Inflate balloons
Use the pump to fill balloons in a mix of sizes, then tie them in pairs or fours with the knotter.
- 6
Attach and style
Clip the bunches along the pole and fill gaps with small balloons, greenery or flowers.
What buyers say
Verified purchases on amazon.com, quoted in short.
★★★★★
Sturdy, easy to assemble
The poles have a good thickness and feel sturdy while still being flexible enough to form the arch… practical to take apart and reuse.
★★★★★
Best time saver I ever bought
I have used it probably 12-15 times already and it's still in just as great shape as when I first got it.
★★★★★
It actually works!
Give yourself about 30-45 minutes of set up time and get a few friends to help. But it came out SO CUTE and was so easy to do.
★★★★★
Great for balloon arches
It's easy to assemble, flexible in how tall or wide you want the arch to be and stable with the water based.
★★★★★
Good quality and easy to use
Super good quality, everything you need for two nice and easy to make balloon towers.
★★★★★
The easiest way to make a fancy arch
It is so easy to set up; literally takes 5 minutes to set it up. The collapsible design… makes it a breeze to take down.
★★★★★
Perfect!
Great price and decent construction. I'm very pleased with this arch and it is taller than I expected.
★★★★★
Great balloon arch kit
Used for a birthday party and all supplies and more were included. Easy to assemble. Looked like a professionally made arch when finished.
Frequently asked questions
The fiberglass arch kit reaches about 9 ft high and 10 ft wide. Because the pole bends between two bases, you set the final height and width by moving the bases; you can also fold some sections double to make it smaller.
No. The kits include the frame, bases, clips, knotters and a pump, but balloons are bought separately. Owners recommend planning a few hundred balloons in mixed sizes for a full arch.
Fill the bags in the bases with water or sand. Outdoors, add the ground stakes and ropes from the kit. On windy days many owners move the arch indoors or lean it against a wall.
The 9 ft × 10 ft arch kit with electric pump and the 7.4 ft arch kit with electric pump. The basic kits include a manual hand pump.
No. The pumps blow regular air, so balloons will not float. That is all you need for garlands, columns and arches.
Not exactly. On amazon.com they sit on one listing, but the black and blue/red pumps are two-nozzle 600 W inflators, while the green one has two motors and five nozzles for foil and long balloons too.
Use zip ties, floral wire, the included ribbon or balloon garland strips. People dress the circle with flowers, tulle, LED strings, macrame or a printed fabric cover.
Yes. It has a burnt finish that resists moisture, rear bracing boards and four U-shaped ground stakes for lawns. Owners note the instructions are short, so lay out the parts first.
The 13 ft table arch and the over-the-table rod stand both clamp to the table edge. The rod stand spans 46.8–99.6 in wide; check that your table has a free edge for the clamps, and note that tablecloths can make clamps slide.
Yes. Fiberglass poles fold down, metal stands unscrew into short tubes and the wooden arch comes apart, so everything stores in a small box until the next event.